Our highly versatile window chain drive is suitable for top/bottom/side-hinged windows, pivoted windows, inward/outward opening windows and skylights. The drive comes in AC230V and can support 250 N force of pressure with a stroke of 250 mm. This drive includes an internal RC transmitter and can be operated via our dual-channel remote. Remote sold separately.

The customised solutions from D+H provide a variety of tested drives, control systems and components. When these work together, they enable smoke and heat exhaust ventilation that is cost-effective and reliable. The innovative CPS-M SHEV control panel heralds a new dimension in safety and security technology. It ensures that the hot, rising air from the fire escapes. CPS-M you have a flexible and cost effective system solution that already fulfils all requirements concerning norm prEN 12101-9.

The Modbus gateway enables communication between AdComNet bus and Modbus-based solutions.

• Universal gateway for connecting AdComNet to a Modbus network
• 200 user‑configurable Modbus inputs (alarm, fault, LT)
• 200 user‑configurable Modbus outputs (alarm, fault, OPEN signal)
• Ability to connect to other fields such as building management system or touch panel via Modbus
• In case of defect in another segment, the functions within and below the segment stay intact
• Power supply possible via SHEV control panel
• Simple integration into the AdComNet network
• Additional battery capacity of 1.2 Ah required

Compared to the IOM-MS, the ADM-MS Input/Output module set offers the option of using 4 of the 12 digital inputs and outputs as analogue inputs. These are freely configurable and suitable for logic operations of various operation elements, such as sensors and signal emitters, via AdComNet. A module socket for connection to the CPS-M is included in the set.

• Consisting of the CPS-M modules:
  – I/O module analog & digital
  – Expansion module socket
• Evaluation of signals via 12 digital inputs, 4 inputs can be used for analog input signals
• Displaying system states via 12 digital outputs (non-isolated)
• Can be expanded with connectors integrated into the module bases
• Installation on 35 mm top hat rail

Reliable roof expert with ACB technology: Our ZA-0800-1-ACB rack and pinion drive opens and closes heavy windows and skylights with ease. By means of the integrated bus system, all status messages, such as the exact opening stroke, OPEN and CLOSED status, etc. can be read out.

• Can be used for openings for smoke exhaust; D+H Euro SHEV in accordance with EN 12101‑2; and for daily ventilation
• With integrated BSY+ motor and synchronised electronics controlled via microprocessor
• Option of up to 8 drives in one synchronous group
• Option of cable infeed above and below
• Drive unit can be changed from left to right
• Programmable drive functions and different drive parameters
• Running speed in CLOSED direction decreases to 5 mm/s (passive closing edge protection)
• Time-controlled reversing when an obstacle is detected in the CLOSED direction (active closing edge protection)
• Integrated ACB (Advanced Communication Bus) bus interface with Modbus protocol
• The drive is integrated directly via open bus communication through the ACB (Advanced Communication Bus), e.g. in a building management system

New Tondgy G01 CO₂ monitor/alarm is used to monitoring room CO₂ level, as well as room temperature and humidity It provides one on/off output to control a ventilator with four CO₂ levels presetting. Especially i t provides both buzzer alarm and three colors backlit switching alarm.

• Design for real time monitoring room carbondioxide (CO₂) level
• NDIR infrared CO₂ sensor inside with special Self Calibration System. It makes the CO₂ measurement more accurate and more reliable in use.
• More than 10 years lifetime of CO₂ sensor
• Temperature and humidity monitoring
• Three color (green/yellow/red) LCD backlit indicating ventilation optimal/moderate/poor based on the CO₂ measurement
• Two alarm ways : buzzer alarm and back-light Colours switch
• Provide optional 1 x relay output to control a ventilator
• Easy touch button for operation
• High quality with the perfect appearance, best choice for home and office
• 220VAC or 24VAC/VDC power selectable; power adapter available; desktop and wall mounting type available
• EU standard and CE approval

D+H VRS 10 has the same functions as the REM 42 rain detector, only in an extremely compact design: The VRS 10 monitors the precipitation and transmits signals to the controller.

• For rain monitoring of ventilation flaps in conjunction with 24 V DC SHEV and ventilation control panels
• Rain signal is stored for approx. 2 minutes (rain hold time)
• Rain sensor in compact design, 24 V DC
• Heated sensor area

The D+H REM 42 rain detector is perfectly suited for rain monitoring in combination with SHEV and ventilation control panels. It is primarily used for natural ventilation.

• For rain monitoring of ventilation flaps in conjunction with 24 V DC drives and D+H control panels
• Rain signal is stored for approx. 2 minutes (rain hold time)
• Heated sensor area

The D+H WRG 82 wind/rain sensor can be set to detect six different wind strenghts and rain.

• Rain signal is stored for approx. 2 minutes (rain hold time)
• Wind switching threshold via DIP switch configurable to 4 or 6 Bft.
• Signal retention time of the wind signal for approx. 10 minutes
• In combination with WE 516, WME 43 or WRZ 8000, it is possible to continuously adjust the wind switching threshold between 2‑8 Bft.; the signal retention time can be selected between 1‑15 min.
• Heated sensor area

The WCS Switch (Push-button) ventilation button is designed for flush-mounted installation. It features an LED status indicator light, double button and is used to control ventilation groups.